Features

1/3hp, 115V submersible pump

115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).

Ideal for draining basements, window wells, garden irrigation, decorative fountains and more

40 gal./min capacity

Rated for continuous use

Operates on continuous duty in temperatures of up to 104?, and intermittent duty up to 140?. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.

Solids handling up to 3/8"

Move slurry and dirty liquids without the worry of damaging the pump.

Lightweight durable stainless steel casing

The pump won?t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.

Automatic non-mercury float switch

Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.

Built in thermal reset switch

If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.

20 foot heavy duty cord

Top discharge

Great for applications where space is tight.

Operates fully or partially submerged

No need to worry about the water level for the pump!

Shielded ball bearings for added durability

Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.

Efficient air-insulated motor

Oil lubricated double mechanical seals

Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.

Specifications

Pump type

Submersible Standard


Starting Type

Automatic


Casing

Stainless Steel


Motor (HP)

1/3


Voltage

115


Starting amps

10


Running amps

4


Duty

Continuous


Motor insulation

Class F


Overhead protection

Built-In Thermal Automatic Reset


Discharge Type

Top


Discharge capacity

40 gpm


Max. head (feet)

23


Port diameter ( inches)

1.25 FNPT


Maximum pressure

10 psi


Solids handling

0.375"


Impeller

Thermo Plastic Noryl


Seals

Single Carbon/Ceramic lower mechanical seal, rubber single lip upper seal


Cord length (feet)

20


Cord type

Heavy-Duty 115V


Dimensions (WxH)

6.4" x 10.3"


Pump diameter

6.4"


Dry weight

11 lbs.


Residential Warranty

1 year


Commercial Warranty

1 year


Accessories

Garden hose adaptor
Low Suction device
Fittings

Manuals

Serial Number

Reviews

  • 5 Stars
  • 4 Stars
  • 3 Stars
  • 2 Stars
  • 1 Star
Overall Rating   
(1 Customer Review)
Write a Review

only honda product i not recommend

Model Reviewed: WSP33 Wednesday, September 23, 2015
james
medina, OH
Type of use:  Home use
the capacitor went on mine after 18 months of service.  if you want spend 250 usd every 18 months then buy it.  i was using as sump pump for the septic sand field of the clear water.  but ended up replacing it in the middle of winter because capacitor went bad and could not replace it.  pump runs about 10 times a day for 4 minutes.  not much life if suppose to be continuous run application.  super disappointed in this product and will not buy another Honda pump
Back to Top