Features

Easy starting Honda OHV commercial engine
Easy starting Honda OHV commercial engine

The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

Durable silicon carbide mechanical seal
Durable silicon carbide mechanical seal

The WB30 features abrasion-resistant silicone-carbide seals for extended wear.

4 vane high efficiency impeller
4 vane high efficiency impeller

The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.

Cast iron volute
Cast iron volute

The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Heavy duty full frame protection
Heavy duty full frame protection

Protects the pump, while offering a convenient tie down location for transport.

Isolation mounted engine and pump
Isolation mounted engine and pump

High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Protected by Honda Oil Alert<sup>&reg;</sup>
Protected by Honda Oil Alert®

Protects the pump by shutting the engine off when low oil is detected.

3 year residential/commercial warranty
3 year residential/commercial warranty

You can rest easy, knowing your pump is covered from top to bottom for 3 full years.

Large strainer
Large strainer

The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.

Specifications

Engine GX160
Displacement 163cc
Bore and stroke 2.7" x 1.8"
Compression Ratio 9.0:1
Oil Alert Std
Pump Type Centrifugal, Self-priming
Volute Rigid Mounted Cast Iron
Impeller 4 Vane Cast Iron
Mechanical Seal (Pump case / impeller) Silicon Carbide/Silicon Carbide
Priming time 150 sec @16.4 ft.
Drive system Direct
Discharge capacity 290 gal/min
Suction port diameter 3" NPT
Discharge port diameter 3" NPT
Total head lift 85 ft.
Suction head lift 25 ft.
Maximum pressure 37 psi
Solids handling N/A
Dimensions (LxWxH) 20.1"x 15.2" x 17.9"
Dry weight 57 lb.
Fuel Capacity 0.82 gal
Run Time @ Max Discharge 1.9 hr
Strainer Part # 78325-YG4-000
Residential Warranty 3 years
Commercial Warranty 3 years

Accessories

A wide variety of hose kits, couplers, adaptors, and other accessories are available.

Manuals

Serial Number

Reviews

  • 5 Stars
  • 4 Stars
  • 3 Stars
  • 2 Stars
  • 1 Star
Overall Rating   
(2 Customer Reviews)
Write a Review

Look no further

Model Reviewed: WB30 Monday, June 29, 2020
SapoTex
El Paso, TX
Type of use:  Home use, Agriculture
I Purchased this new two seasons ago to irrigate my property.  This machine has paid for itself time and time again it is easy to start . starts on the first pull. It’s pretty economical on gas so easy on the pocketbook.  I highly recommend this machine to anyone out there. I spent a lot of time researching and the only answer was a Honda.  I would not hesitate to buy another one.  The only thing I would do to improve the machine would be to make a wheeled kit available for it. Thanks Mander for making this machine.  For a city boy who’s become a country boy Honda is the way to go.

Throws much water! Always starts with one pull

Model Reviewed: WB30 Friday, May 16, 2014
Wheelman
Philadelphia, PA
Type of use:  Construction/Industrial
I've used this model pump for several years. I am in the construction field and I use it to de-water basements and fill a 1500 gallon hydro seeder.  This pump has given nothing but excellent service and when compared to other pump makes I've used these are head and shoulders above the rest.  This pump is extremely productive, fairly lightweight, and would start on one pull in near freezing temps! I am very satisfied with it and I only use Honda pumps for their continuous reliability!
Back to Top