CO-MINDER™ continuously monitors carbon monoxide (CO) levels. It automatically shuts down the generator before detected CO levels near the generator become dangerously high.
The EB10000 uses Honda's exclusive DAVR (Digital Automatic Voltage Regulator). The DAVR is designed to hold the voltage stability within a +/- 1% range during operation. This provides more consistent power.Learn More
The Honda V-Twin engine offers more power, reliability, greater fuel economy and reduced emissions in a more compact package.
The EB10000 has a compact, slim design that can be easily installed on the job site. A centralized exhaust mechanism creates a unique "hot" zone for exhaust and "cool" zone for operation and passage. This design is especially helpful when using multiple units, as they can be easily positioned so as not to impact each others' cooling ventilation.
The Honda EB10000 generator operates at a quiet noise level—73 decibels at 7 meters (equivalent to the noise of a vacuum cleaner). This low noise level is achieved through a large muffler that includes a punching pipe, a perforated mechanism that allows for the smooth release of exhaust gas.
The control panel is positioned on the narrow side of the generator for convenient, easy access to all outlets.
i-Monitor™ provides information on hours of operation, generator output voltage, and battery voltage, as well as diagnostics for convenient dealer servicing.
You can rest easy, knowing your generator is covered from top to bottom for 3 full years.
Wide, positive lock folding handles offer convenient transport and storage and a more compact unit.
The sturdy wheel kit makes the EB10000 easier to transport, even over rough terrain.
The EB10000 runs an impressive 7.9 hours at half load and 5.4 hours at full load.
The EB10000 offers neutral bond and full generator GFCI (Ground Fault Circuit Protection) on all outlets.
The EB10000 was designed to meet OSHA requirements, making it ideal for worksite applications.
Helps protect the generator.
Protects the generator by shutting the engine off when low oil is detected.
Protects the generator from being overloaded.
The EB10000 is designed with an easy-to-remove air cleaner and an oil gauge located near the oil filler cap – all elements that allow for ease of maintenance.
Allows for easy battery access and maintenance.
This generator can power the following common applications. Please note: not all applications can be powered simultaneously. For more help, see our power needs page.
- Air Compressor
- Bench Grinder (8 in.)
- Circular Saw (Heavy Duty, 7 1/4 in.)
- Concrete Vibrator
- High-pressure Washer (1 hp)
- Table Saw (10 in.)
- Industrial motors, up to 3 hp